banner
Home » Product > CNC Lubrication System
Product Categories
Thin Oil Volume CNC Machinery Lubrication System

Thin Oil Volume CNC Machinery Lubrication System

FOSHAN SHUNDE GUOQIANG DAOSHENG CO.,LTD. Product introduction: Thin oil volume type lubricating system is composed of YP and YP-F series of pressure-relief electric gear lubricating pump and filter, fuel-flow divider, volumetric distributors, copper connections and oil pipes. Installation and...

Send Inquiry

image001(001).jpg

FOSHAN SHUNDE GUOQIANG DAOSHENG CO.,LTD.


Product introduction:

image003(001).jpg

Thin oil volume type lubricating system is composed of YP and YP-F series of pressure-relief electric gear lubricating pump and filter, fuel-flow divider, volumetric distributors, copper connections and oil pipes.


Installation and use notes:
1. The connecting tubing export must be cut flat, to ensure that the connections do not leak, otherwise it will lead to a slow leak pipeline pressure relief or can not even make pressure accumulation, so that the distributor can't storage oil or output oil normally.
2. When installing, ensuring all the internal pipelines are cleaning, and host and main pipe line installation of any non-return device is strictly prohibited.
3. Please use normal clean lubricating oil, and the best general viscosity is 32cSt-250cSt. It is prohibited to use oil with high unique or acidity.
4. Suitable temperature 0 to 50°C.
5. Noting temperature changes of the using environment, adjusting oil viscosity appropriately, then advicing that below 15°C with R32, more than 30°C with R68.


Basic applicationconfines:
1. Type gear pumps (intermittent).
2. Gear pumps(continuous)


Volume type lubrication system using component diagram:

image005(001).jpg


System's characteristics:
1. Using unused lubricating oil without filtering with filter
2. Intermittent quantitative oil supply, accurate measurement.
3. Each quantitative holes's oil quantity won't vary with oil viscosity, temperature change, limerick time changing.
4. Volume type distributor's oil output with the same specification every time can not affct by the installation position like high er and lower, futher and nearer.
5. Can confirm the working condition of distributor directly by visual.
6. For oil's amount in the actual use, volume type system is more economical and environmental protection.


System configuration notes:
In the volume type lubrication system, each lubrication point must correspond to a quantitative hole, it is strictly prohibited to lubricating points not through holes but straightly lubricating, otherwise it will cause the pipeline to the pressure accumulation, and the distributor can't storage oil or output oil normally.
Must use match with the volume type lubricating pump, and strictly prohibit use with the resistance type lubricating pump.


Our Service:

image007(001).jpg


Buyer instructions
The Product we have special departments to ensure that no strice quality control any quality problem before dulivery.
The pictures due to taken in light and the monitor, pictures may have a slight chromatism problem, this is inevitable, please forgive! if cannot accept buyers please buy cautiousil.
Specifications and stock carefully check goods size tableand product apecifications.please check detail with customervice before buying.


Payment

image009.jpg


There are two reasons why you can sign up for your return within 7 days:
1. the quality of the reasons:
(1) contact the sales certificate issued by the quality problems
(2) product packaging integrity
(3) product accessories and gifts complete
(4) provide product images and outsourcing pictures
(5) Undertake ordinary transport costs (hair SF and other expensive courier, the difference between the cost borne by the customer), do not receive attachments
2. No reason to be returned:
(1) the product does not affect the secondary sales
(2)the product packaging complete
(3) product accessories and gifts complete
(4)the product notes sent back with the customer bear the return shipping


Contact Us:
FOSHAN SHUNDE GUOQIANG DAOSHENG INDUSTRIAL CO.,LTD.
TEL: +86 18923291668
Mail: louisalu@das-cnc.com
Address: NO.4-7, Xingye 3rd Road, Guanglong Industrial Park, Chencun, Shunde District, Foshan City


Hot Tags: thin oil volume CNC machinery lubrication system, suppliers, factory, brands, quotation, price list, in stock, free sample

Inquiry