After the machine tool geometry accuracy inspection is qualified, needs to clean the whole machine. With a cotton or silk cloth soaked with detergent, no cotton yarn or gauze shall be used to clean the antirust oil or antirust paint which is applied to protect the guide surface and the processing surface when the machine is manufactured. Cleaning the outside surface of the machine dust, in each sliding surface and face coating to machine tools to make lubricating oil.
Carefully check whether the parts of the machine are added to the requirements of the oil, cooling box whether to add sufficient coolant, machine tool hydraulic station, automatic lubrication device oil to the oil level designator specified parts.
Check the electrical control box of the switches and components are normal, each plug-in integrated circuit board is in place.
Power start centralized lubrication, so that the lubrication parts and lubricants road filled with lubricants, do a good job in the machine tool parts before the action of all preparation.