PT 
EN 
AR 
DE 
ES 
ZH 
KK 
IT 
DAS TA-8-DIY CNC Turning Milling Machine | Twin Spindle Twin Turret CNC Lathe with Dual Y-Axis
Dual 8-inch Spindle Dual Y-axis Power Turret CNC Lathe
Especificações do produto
| ITEM | UNIT | TA-8-DIY |
| Max Swing Diameter | mm | φ350 |
| Diâmetro máximo do processo | mm | φ240(Through-Center) |
| Max Distance Between Two-axis chuck faces | mm | 780 |
| Spindle / Sub Spindle Nose | / | A2-6(Main)/A2-6(Sub) |
| Spindle / Sub Spindle Speed | r/min | 0-3000/0-3000 (Factory Setting) |
| Spindle / Sub Spinle Bore | mm | Φ66/Φ66 |
| Spindle / Sub Spindle Bore Diameter | mm | φ52/φ52 (cannot pass material when paired with a solid-center cylinder) |
| Canmatch Max Speed of Power Head | r/min | 4000 |
| Spindle Motor | KW | 15 |
| Instalação de ferramentas | / | Turret Rotation |
| Formas de torre | / | BMT65, 12-station Y-axis Power Turret |
| Especificações da ferramenta Power Head | – | BMT65, ER32 |
| Turret Position | peças | 12 Stations × 2 |
| X1,X2/Z1,Z2 Axis Travel | mm | 360(Diameter Measurement) / 285, 770 |
| Deslocamento do eixo Y1/Y2 | mm | ±65/±65 |
| X1,X2/Z1,Z2 Axis Repeatability | mm | 0.01 |
| X1,X2/Z1,Z2 Axis Positioning Accuracy | mm | 0.01 |
| Tamanho do suporte de ferramentas quadrado | mm | 25*25 |
| Tamanho do suporte de ferramentas com orifício redondo | mm | φ32/φ40 |
| Servomotor da cabeça de força | KW | 5.5 |
| Servomotor da torre | KW | 1.0 |
| X1,X2/Z1,Z2/Y1,Y2 Axis Moving Speed | m/min | 20/20/10 (Configuração de fábrica) |
| Potência do motor da estação hidráulica | kW | 3.75 |
| Potência da máquina | kW | 75 |
| Netweight | kg | 8000 |
| Machine Dimensions (L*W^H) | mm | 3200×2200×2100 |
TA-8-DIY Twin Spindle CNC Turning Milling Machine
Complete Complex Parts in One Setup — Faster, Easier, More Profitable
TA-8-DIY CNC turn-mill center cuts secondary operations and increases productivity.
Com um twin spindle, twin turret, and dual Y-axis configuration.
This machine can complete both ends of a part in one cycle—no re-clamping, no manual flipping.
From turning to milling, drilling, and tapping, everything is done in one machine, in one setup.
Why This Machine Stands Out
✔ One Setup, Full Process Machining
Machine both ends of the part without stopping:
- Facing
- OD & ID turning
- Side milling
- Drilling & tapping
O sub-spindle automatically picks up the part, so machining continues seamlessly.
👉 Result: No second setup, no alignment errors, higher consistency
✔ Twin Spindle = True Continuous Production
Once the main spindle finishes:
- The sub-spindle takes over instantly
- The turret continues machining the other side
No idle time. No waiting.
👉 Increase efficiency by 30%+, especially in batch production.
✔ Twin Turret + Y-Axis = Real Multi-Tasking
Equipped with:
- Dual live tool turrets (up to 12 stations each)
- Full Y-axis milling capability
Handles complex operations like:
- Off-center machining
- Side slotting & milling
- Polygon machining (square / hex)
- Radial drilling & tapping
👉 Replace multiple machines with one compact solution
✔ Wide Machining Range
- Dual 8” high-rigidity spindles
- Max spindle distance: 780 mm
- Max bar capacity: Ø52 mm
Suitable for:
- Shafts (long & short)
- Sleeves & bushings
- Precision metal components
👉 One machine covers a wide range of part types
✔ Built for Stable Mass Production
Standard with:
- High-pressure coolant system
- Precision filtration system
- Automatic chip conveyor
This ensures:
- Better cooling during long runs
- Cleaner cutting environment
- Smooth chip removal
👉 Lower failure rate, longer tool life
✔ Easy to Operate
- 10-inch smart control panel
- Clean, intuitive interface
Operators can:
- Program quickly
- Adjust parameters easily
- Run batch production with one click
👉 Suitable for both skilled workers and new operators
What Can You Produce?
Shaft-Type Parts
Motor shafts, gear shafts, transmission shafts, piston rods
→ Machine both ends in one cycle, no flipping required
Sleeves, Bushings & Connectors
Internal turning, threading, grooving, facing
→ Ideal for high-volume production with tight tolerances
Complex Multi-Process Parts
Parts requiring:
- Turning + milling
- Side features
- Eccentric holes
- Polygon shapes
→ Fully handled by twin turret + Y-axis
Industries Served
- Automotive parts (fasteners, connectors, valve parts)
- Hydraulic & pneumatic components
- General machinery & automation parts
- Plumbing & precision hardware fittings
👉 Especially suitable for high-precision + high-volume production
Material Compatibility
Works with most metals:
- Carbon steel
- Alloy steel
- Stainless steel
- Aluminum
- Copper
Handles both:
- Light precision cutting
- Medium to heavy-duty machining
Who Is This Machine For?
This machine is ideal if you:
- Run batch production with complex processes
- Want to reduce labor and setup time
- Handle multiple part types
- Do OEM / contract machining / custom parts
Bottom Line
O TA-8-DIY twin spindle CNC lathe helps you:
- Reduce setups
- Increase output
- Improve consistency
- Lower labor costs
👉 One machine replaces multiple processes — and pays for itself faster
